top of page

The Chemistry of Mineral Armor’s Protector and Rejuvenator

How Mineral Armor’s proprietary formulation delivers substrate durability, hygiene, reduced porosity, and soil release.

1. Durability

  • Protector and Rejuvenator consist primarily of silicon–oxygen bonds that form colloidal silica spheres.

    • “Colloidal” refers to nanoscale particles dispersed in water. As the Protector cures, these spheres link together into a three-dimensional network.

  • Silica is a mineral and the major component of both Protector and Rejuvenator; the proprietary formulation of Protector and Rejuvenator creates an inherent hardness that traditional organic or polymer-based floor finishes lack.

  • The silica spheres coordinate with one another to form a highly organized three-dimensional network. This gives Protector greater mechanical strength than traditional organic or polymer-based floor finishes, which are inherently disorganized.

  • This ordered framework leaves no cleavage planes, catch points, or weak spots where the Protector can easily break or snag on something passing over it. Protector resists scuffing, micro-abrasions, black marks, staining, salt corrosion, and walk-off, and will never yellow.

  • Mineral Armor’s proprietary formulation produces a highly organized three-dimensional structure, which creates an extremely dense coating that allows Protector to score roughly 5.5–7 on the Mohs hardness scale, depending on the smoothness and type of substrate. The Mohs hardness scale explained: The low end is harder than tooth enamel and ordinary steel; the high end is as hard as quartz. Interesting information: Quartz is silicon dioxide, a continuous three-dimensional framework of silicon-oxygen tetrahedra, like Protector.

 

2. Protector: A Revolutionary Curing Process

  • During the curing process of the Protector, the only component released is water vapor. All Mineral Armor products are water-based, and every other ingredient is incorporated into the Protector framework once cured.

  • The Protector particles self-assemble into a three-dimensional network as they cure, regardless of environmental conditions.

    • Conditions do affect cure time: higher humidity lengthens the time to full cure.

    • Average cure time between Protector applications is 15 to 20 minutes, depending on ambient temperature and humidity.

  • Mineral Armor’s proprietary formulation produces excellent wetting properties, creating a simple and consistent installation process for the Protector and producing uniform coats that won’t pull toward the edges the way many traditional floor finishes do.

  • As the Protector cures, Protector’s spheres migrate toward the surface. This migration to the top creates a durable, non-film-forming shield while improving adhesion at the substrate interface. Protector’s curing process allows trapped water to escape easily—the complete opposite of traditional organic or polymer-based floor finishes, which end up thickest at the bottom and make it difficult for moisture to escape.

    • This migration does not compromise the coating’s structural strength.

    • Protector’s non-film-forming shield allows the floor to “breathe.”

  • Although water is the carrier, the cured Protector is highly hydrophobic, attributed to the silicon–oxygen bonds that form as the water evaporates during the Protector’s curing process.

  • The silicon–oxygen bond is extremely strong and is not broken by water. Mineral Armor’s proprietary formulation further increases hydrophobicity once cured.​

​​

3. How Protector and Rejuvenator Inhibit Microorganism Growth

  • Protector and Rejuvenator use Mineral Armor’s proprietary formulation, which creates an inorganic silicon–oxygen framework, leaving nothing for microorganisms to feed on. Microorganisms cannot digest silicon–oxygen materials, so any that reach a Protector-installed floor or a floor maintained with Rejuvenator have no food source to grow on. Microorganisms also have a hard time anchoring and forming a biofilm on the floor because of the surface energy of a Protector-installed floor or a floor maintained with Rejuvenator.

  • The densely packed silica in a Protector-installed floor or a floor maintained with Rejuvenator keeps water, microorganisms, and organic matter from penetrating or attaching to the surface, further depriving microorganisms of what they need to grow.

  • In both liquid and cured form, Protector and Rejuvenator have a high pH. During Protector application, auto-scrubbing, or mopping with Rejuvenator, microorganism growth is immediately inhibited on contact.

  • Rejuvenator, as a daily cleaner/maintainer, increases gloss, removes micro-abrasions, increases traction, and increases durability while also cleaning the floor simultaneously. The Mineral Armor proprietary formulation of Rejuvenator inhibits microorganisms from attaching to surfaces/floors to which Rejuvenator is applied. Revive and renew your floor with Rejuvenator.

​​

4. How Protector and Rejuvenator Reduce Odor

  • Each nanoparticle of Protector or Rejuvenator has a very high relative surface area, so many odor-causing compounds adsorb onto the nanoparticles of Protector or Rejuvenator and are then trapped by the applied coats of Protector or by daily cleaning with Rejuvenator, which penetrate the microscopic pores of the substrate as it cures. The curing process keeps odor molecules from escaping into the air, effectively eliminating the smell. Protector and Rejuvenator have shown the ability to actively break down odor-causing molecules.

​​

5. Rejuvenator’s Cleaning Properties

  • Mineral Armor’s proprietary formulation has produced a Rejuvenator that continuously demonstrates strong cleaning properties. Rejuvenator does not contain any of the traditional cleaning ingredients: no detergents or solvents. Rejuvenator is VOC- and PFAS-free. The same mechanism that eliminates odor effectively works as a cleaner. The Rejuvenator spheres scrub and bind to dirt, dust, and organic matter and capture the items that make up soil.

​​

6. Why Protector and Rejuvenator Work on Concrete, Marble, and Terrazzo

  • Concrete, marble, and terrazzo all contain large amounts of silicon in the form of silica. That same major component found in concrete, marble, and terrazzo is a major ingredient in Mineral Armor’s proprietary formulation for Protector and Rejuvenator. Because Mineral Armor shares a major component with those substrates, Protector and Rejuvenator have a uniquely strong affinity for them. Mineral Armor’s proprietary formulation allows Protector and Rejuvenator to penetrate deep into microscopic pores, cracks, and imperfections, not only shielding the substrate but also restoring it.

​​

7. Mineral Armor Is Always Advancing Our Technology

  • Mineral Armor’s proprietary formulation has been recently reengineered. The result of the reengineering is: 1) Protector now has smaller spheres, allowing Protector to penetrate even finer pores, cracks, and imperfections in all substrates for greater restoration, gloss, and increased coverage rate. 2) Rejuvenator now has smaller spheres, allowing Rejuvenator to penetrate even finer pores, cracks, and imperfections in all substrates for greater scrubbing/cleaning power and the ability to revive and renew the substrate to an even higher level.

bottom of page